Tuesday, August 17, 2010
Diesel Dreams
Tuesday, July 20, 2010
Is This Progress I See Before Me?
Sunday, June 6, 2010
Measure Twice, Buy Once
With the fireplace in its home, I decided to finalize all of the plumbing and wiring for the propane system as my first chore for the weekend, starting with the hose for the galley stove. Once I cleaned out the port side lazarette, I wedged myself in there and ran the hose up high against the underside of the deck so it will be out of the way and won't get any abuse when we drag things in and out of that locker. Note to self: make sure you have all of the tools you will need before crawling down there. Getting in and out of that space is not easy. You can't see it in this picture, but I did at least think to tie the lid open so as not to get trapped when a gust of wind slammed it shut.
While we're down here, check out that lovely plywood backing block for the winch stand. Awesome. Add replacing those to the list of things to do...
- Finished painting the forward cabin. It's all sparkly white now and looks fantastic. When the newly finished wood panels are back in place, it will look amazing. I didn't really appreciate how nasty the old finish was until the new paint was on and dry.
- Cleaned up the space where the old fuel tank used to live and made measurements and plans for the new tank. We gain 3 gallons of fuel and upgrade from a steel tank to a poly tank, but it will require cutting up this space to make it fit.
- Painted out the port lazarette in lovely BilgeCoat White. It looks sharp. Take my word for it.
- Then I retired to the beach and treated myself to a little camp fire. Just one of the many perks of The Boat Yard.
Saturday, May 29, 2010
We're Still Here. I Promise.
I thought I'd start us off with an image of actual sailing. Since our boat is still a driveway squatter, I have to hitch rides on other boats. This was taken during the 65 mile "Round Whidbey" race on Dent-de-Lion, a Morgan 30 I sometimes "race" on. Sigh. Beautiful, no? We were even in first place when I took this shot.
Anyway, back to reality...
You know you have neglected your blog space when you get a notice that it is about to be terminated due to lack of activity. After going through Blogger’s amazingly complicated system for re-establishing my account, I am proudly back up and running.
You would think that with 7 months between posts there would be a lot to catch up on. Maybe you are expecting to see that our little boat has emerged from the gray blanket of the Northwest winter ready to hit the Puget Sound and carry us to far away destinations. Nope. Not quite.
She still sits on the stands at the Boat Yard, enjoying her view of the water she will one day sail. And, despite a rather hit-or-miss work schedule over the winter, some progress has been made.
ENGINE REMOVAL
One rather anticlimactic job was to disconnect and dismantle the existing engine. The old Yanmar will have to find love somewhere else, ‘cause it can’t live in our bilge anymore. Sadly, there is no replacement option immediately available.
Still, I figure we need to take the engine out one way or another, so on a particularly dark, wet weekend I dismantled the ancillary parts and disconnected the engine from its fuel system, electrical harness, and from the boat itself. And there it sits: completely disconnected and ready to lift out. We are waiting for the weekend when we rent a lift to wash the w
inter moss off the roof of the house to lift the engine with it. Two birds. One stone. etc.
The fuel tank is out, the hoses are out. We’re ready to move on!
Having that engine out will free up a lot of space to facilitate running wire and plumbing, as well as installing the dripless shaft seal and basically cleaning up the lockers and engine room. I’m looking forward to seeing that space cleaned and painted, actually.
Maybe by the time we get done with that the new engine will magically appear on a pallet next to the boat. Maybe. So far Santa has cast a deaf ear to those thoughts.
ELECTRICAL REMOVAL
Every wire that isn’t permanently glued to the hull (grrrrrr) has been pulled out. Every wire that can’t be removed has been cut as far back as possible. We’re going all new on this one. Old light fixtures are gone. The old electrical panel is gone. Batteries are gone. Rebuilding this ought to be an adventure.
WOOD WORK
All of the wood parts that could easily been removed have been relocated to the garage at The Shack, where we spend most of our time. This way even when we aren’t able to get to the Boatyard, we can be making progress on the boat.
All of the wood is solid and in great shape. We are sanding it down to remove any water stains or other blemishes and refinishing it with three coats of Cetol Marine “Natural Teak.” It really looks excellent on the doors, drawers, and panels. Only the bulkheads and some of the built-in furniture will need to be refinished while on the boat.
FRESH WATER
The existing set up required hauling a hose down below, lifting up the v-berth cushions, and opening the tank to fill it up. What a drag! I'd rather cut a hole in the boat and run some hose.
So I added a fresh water fill on the starboard side. The fill hose is hidden in the closet in the head compartment and runs forward under the bunk boards in the v-berth.
HEAT
Because I can't get enough with the hole saws, I had to seek out a project that would let me make use of the 3". I knew I'd need it eventually!
The latest project got a little fast-forwarded when a Dickinson P9000 propane fireplace came available on Craigslist recently at a steal of a price. And it happened to be for sale just miles from my Dad’s house. Hey Dad, want to do me yet another favor? Thanks.
So a half-price fireplace spurred me on to get some heat installed this weekend. Just in time for summer.
Since it is used, I had to fire it up to make sure it worked.
Yep. She works!
Next it was time to create the space for our new best friend (it gets really cold at night around here!) to live. We long ago decided that the bookshelf nook on the starboard side was the logical location. A little deconstruction, reconstruction, and refinishing, and I had this. (By "a little" I mean 8 hours. These jobs take forever...)

I cut a three inch hole in the top of the nook for the chimney stack. This protrudes through the shelf in the head compartment closet, but is nicely concealed from the cabin of the boat. Maybe some of that residual heat from the stack will throw a little warmth into the v-berth. Yeah, right.
Nice, eh? Off to Dad's garage I went to get some "Great Stuff" foam (the stuff you can buy in a spray can at Home Depot). It's sole purpose is to fill in the voids between the deck and the cabin liner and to make the hole through the deck uniform. I taped off the bottom side of the hole and filled her right up with the foam. Thanks Dad.Wednesday, November 4, 2009
Moving Liquids
Last week I managed to make some good progress on the rebuild of the waste system. When we got the boat, it was plumbed with the toilet connected to the holding tank and an overboard discharge. Totally illegal, and also not practical. The new system, in addition to having more options for, well, "waste-management" will have a new toilet that actually works and hose that was meant for sanitation systems (odor-resistant...very important).
Step One: Rip Out the Old Sh*%
This is a disgusting job now matter how careful you are. The holding tank was partially filled with seawater and some of that awful blue holding tank deodorizer (which doesn't work, by the way). The hoses were caked with what I can only assume was waste that didn't make it all the way to the tank, and the toilet was just plain nasty. I saved the toilet in case anyone wants it. Errr.
Here is a look at the old tank and hose setup before I started destroying things and swearing at inanimate objects:
With the tank removed from underneath the port settee, here is what we were left with. Notice the lovely (completely seized) seacock and the nasty waste hoses.
I did manage to get the beast out of there. I am keeping it on the workbench to remind me why I am not replacing any seacocks with bronze. This picture shows the hole left after the seacock came out, including the remnants of the old plywood backing plate.

Step Two: Install the New Stuff
With the seacock and the hoses out, it was time to get the hull ready for the new fittings. The flange for the new Marelon seacock was wider than the old bronze fitting, so the backing plate had to be larger. I started by cutting the hole in the hull liner to 6.5 inches in diameter and cleaning up the inside of the hull to get ready for a new backing plate, which I made out of marine plywood sealed with epoxy.
This image shows the cutout waiting for the backing block.
Several hours with a Dremel grinder got me an acceptable result:
First step, get the through hull fitting in place, along with the recessed bolts that will hold the seacock in place. You can see that my work on the cutout is less than perfect, but sealed well with the 3M product of choice and fared in when we get ready to paint, and this will be just fine, he says.
And here is the view from the inside. Very nice. No corrosion potential, easy to maintain, and unlikely to seize in place. I aligned the handle to run athwartships just so it would be easier to get to and open or close. The hoses will run to either side of the seacock.
This is a look at the small 3/4" seacock for the raw water intake on the head. This one isn't hidden in a locker so I made the backing block out of a piece of teak I had left over from a job on the old boat.
The toilet is bolted in and ready for the hose installation. We will be rebuilding the cabinetry in the head to actually have some storage. More on that soon.
And that's where we stand for now. I have the hose for the remainder of the install work, and the holding tank has been sanitized and cleaned. Before I reinstall the holding tank and strap it in place, I need to run a few hoses and wires for the freshwater system and some other things, but once I do that, we can button this project up and move on!
Wednesday, October 21, 2009
Candy Store

It's an exciting week for me. With a full workday planned at The Boat Yard on Friday, I need to pick up some supplies. And that means I get to go to Fisheries Supply. How much do I love this place? Two floors of everything you could ever want for a boat. All the coolest sailing gear, hardware, electronics, and just all around boating stuff there is. If you are a boat nerd, Fisheries is your Candy Store. One expensive candy store. It's a stroke of luck that there isn't much room on the old Visa card these days...
But even better than the store is the Fisheries Supply Catalog. For those of you who aren't in Seattle and can't make it to the retail store, the catalog is a pretty good substitute. Everything about both the store and the catalog puts Worst Marine, Defender, and the rest to shame. Do yourself a favor and order up a copy. Pretty soon you'll be doing projects on your boat just so you can order stuff. I feel like Navin R. Johnson every time the new catalog arrives on the step (it's too big to fit in the mailbox): "The new phonebooks are here! The new phonebooks are here!"

But I'm getting off track here...and now I have the urge to go order The Jerk on pay-per-view.
Anyway, I just placed a will-call order for some thru-hulls, seacocks, and other plumbing parts to get the sanitation system back in place. We're going from bronze to Marelon thru-hulls (I've not found a single good reason to keep metal thru-hulls. Anyone?) and running the pipe in a little more logical manner. We're also redesigning the system to have a pump overboard or pump out option. We call it the Northwest Package: in Puget Sound you can't even spit overboard anymore, but cross the imaginary line in the middle of the Straits of Juan de Fuca into Canada and shit directly into the ocean. It's a strange world we live in. On one side of that purple dotted line, you have to have your overboard discharge locked closed. On the other? Flush away.
The plan is pretty simple, and so far I've rounded up all of the parts except the manual pump for the overboard discharge. No one seems to have the one we need in stock, so I'll just have to leave room for it in the layout and keep searching. Which reminds me:This weekend I also need to go see Previous Boat Owner, who called last week to remind me that he still has an outboard engine and "some other stuff that goes with the boat" at his house in Port Townsend. Seems that so long as I am in Port Townsend it would be a shame not to browse through the boatyard. The consignment shop there is one of my favorite haunts, and the shops up there actually carry the stuff people need for their boats, not just drink cozies and "Life's Good" t-shirts (I'm looking at you, Worst Marine). Who knows what I'll find when I'm there! Something I have to have, no doubt.
I will take some award-winning pictures of the progress this weekend. I'm sure this will be the time nothing at all goes wrong with a boat project. Right?
Monday, October 5, 2009
Power
And then on a early trip, the kind little Yanmar 2GM caught a case of engine runaway and almost took the boat to the bottom of the Puget Sound with it. Scary stuff, that. I got lucky, and the runaway stopped itself after a few minutes and before the engine completely seized, but it was never the same after that. Or maybe it was that I was never the same again. Something like that.
From that day on I was always pretty sure I could hear the engine sputtering or laboring. I always had a little tick of nerves that she was going to go south on me. She never did, and was still running great when we sold her years later, but the damage had been done to my psyche.
So here we are with our new-old boat, getting ready to find a way to get a new engine in there, and I have admit that I'm pretty damn excited about it. The idea of starting completely fresh is making me into a bit of a mechanical geek: reading manuals, learning about reduction gears, calculating torque ratios, sketching installation plans. Even the simple idea of a perfectly clean and organized engine space is motivating enough to make me want to rip the old Yanmar out and get started.
And I think we might have settled on our engine:
Isn't she adorable? This is the Betamarine 14. A 13.5 horsepower 2-cylinder marinized Kubota engine. I spoke with the local dealer this morning about our project and I have to say I have a lot of confidence in them. The engine would come with mounts to match the current installation, all wiring, the control, and all the support I need from the yard. They will customize it with specific options for our needs (bigger alternator, hot water heater hook ups, etc) and from actual order to a pallet in our garage is one week.The ONLY problem is that the base cost is 6 full Boat Units. For the price of this engine we could get:
- 500 cases of Red Hook ESB
- 3,000 nonfat lattes at Jason's Java
- 3 full sets of new sails
- 2 rebuilt Yanmar 2GM engines
- 1 used Cape Dory 25
- 2 used Santana 22s
- 1/2 of a BMW F800GS
- Out of debt.
So now we're actively entering into the fundraising portion of this program. I might have to start drinking cheap beer again to make this one work...
-g



